Browse our Site:
Contact Us
BSB Engineering Services Limited
Unit E
Tribune Drive
Trinity Trading Estate
Sittingbourne
Kent ME 10 2PD
T: +44(0)1795 422609
F: +44(0)1795 429543
Contact
our Sales Office for more information
HD Series Literature
Download Brochure
Operating and maintenance
HD Series Options
Flangefit
width 100 to 2500mm
height 100 to 2000mm
SpigotFit
width 100 to 2500mm
height 100 to 2000mm
Circular SpigotFit
Dia. 100 to 2000mm
Flat Oval Spigotfit
width 100 to 2000mm
height 100 to 2000mm
Control Options
Extended spindle
Hand Control
Electric Motor
Pneumatic Motor
Multiple assemblies available
Product Range
BD Series
DD Series
Control Panel Systems
FD Series
FSD-TD Series
SB Series
SC Series
SF Series
Product Range
HD Series
Heavy Duty Control Dampers
The HD Series
Multi-Leaf Volume Control Damper has been specifically designed for installation
in systems where high air pressures and velocities are experienced.
Combined with a robust construction, the damper is suitable for use on air
handling units.
Dampers for air control can be manufactured with a single drive to a maximum
size of 2500mm wide x 2000mm High. where low closed blade leakage is required,
the max. size with a single drive is 1000mm x 1000mm.
Manual Quadrant Control, Motor Option or 19mm dia. Extended Spindle for actuation
by others are available as standard.
Featuress
• Standard case construction is galvanised
mild steel
• Three airfoil blade designs
• Four casing options
• Low and high pressure models
• Out of airflow linkage
• Easy conversion from manual to motorised
or vice versa
• Can be supplied with blades and case
in 316 or 430 stainless steel
• Balance and control dampers
• Infinite sizing capability
• Variable flange dimensions and casing
widths
• Comprehensive control options
• Stainless steel side seals to order
Specifications
& Tests
• Unless stated otherwise, flange models suitable for class A & B of
DW144, spigot models suitable
for class A B & C
• Conforms to HVCA specification DW144
• Conforms to Eurovent 2/2 classes
A - C
• Independent performance tests for
pressure drop, leakage and airtightness. Test reports 158 and 160 refer
Blade Detail
Plain
Air Balance Blade with
End Caps (left)
Twin Edge Seal Blade (centre)
Precision Rolled Blade (bottom)
The 100mm
wide galvanised blade is offered as standard with the option of extruded
aluminium airfoil section or precision rolled grade 430 or 316 stainless
steel available to order. All blades are fitted to 19mm diameter spindles.
All models are
available with either opposed or parallel blades (opposed as standard).
End Caps are
fitted to the ends of aluminium blades to alleviate noise generation.